THE JCT-900SDG1 IS A ALL IN ONE CAMERA, NANNY CAMERA SCULPTURE BASE

Technically yes with external 4AA battery holder (except for the clock radio & boom box models). But the battery will last for about 6 ~ 7 hours using 4 AA lithium batteries (motion detection recording does not save power since the camera & recorder is on all the time). We strongly recommend using the included power supply.

Yes, but IR LED Lamps are only compatible with B/W cameras or Day & Night (dual mode) cameras.

Sound option for all-in-one camera is optional for extra $50. You will need to fax us a disclosure for purchasing a covert listening device. http://www.spycameras.com/audio law.htm

The camera is fully programmable. If you need to change any settings, locate the RCA jack (refer to your manual) on the camera and connect to a TV. Access the menu for the DVR by pressing the buttons on the DVR inside. Please refer to the DVR manual

You'll need a SD card reader: http://www.spycameras.com/item,sdcardr1,high-capacity-sd-card-reader.html or use one built-in to your PC if there is one. (any card cards over 2GB are high capacity and you must used a high capacity reader)
Simply take out the SD card from the camera, insert the SD card into this card reader, and plug it into a USB slot on your computer. Wait until the window opens for this card or locate the card using Windows Explorer (Windows key + E).
The computer will recognize the SD card as a removable storage device. All you have to do is right click on the video folder and open it with a media player (we recommend GOM player)

Our all-in-one cameras can record upon motion, scheduled and continuously. (it's programmable)
DVR senses pixel movement of the video signal from the camera. Since you can have the DVR record only upon motion, you can extend the recording time period which it is intended to cover. Each 1GB of memory will record up to 2.5 total hours of video.

Technically you can use external 4AA battery holder, P-6AA, to power the camera. However you have to use lithium batteries and the camera will last about 6~7 hours.
Note: motion detection recording does not save power since the camera & recorder is on all the time. We strongly recommend using the included power supply.

The standard camera that comes with the system as a default, switches to B/W mode and work better under low light then other cameras upgrades except for the full B/W camera upgrade. Low light capability: Default Camera: Better B/W CCD, 600 TV line, 0.003 lux. camera used: VC-600S: Best Full color CCD, 480 TV line high res. cam used: VC-400P: Good (not IR sensitive) Full color CCD, 540 TV line high res. cam used: Good (not IR sensitive) However for a night vision, you will need a separate IR lamp. Since an IR lamp glow red a little, for total covert operation, you will need to place the IR lamp unseen, point it upward for indirect lighting. note: all cameras works good under bright light. Super low light B/W cameras: Most sensitive. B/W cameras: sensitive. Day & night color cameras (color at normal light, B/W at low light): sensitive. Full color cameras: not sensitive.

Yes, and since we had to convert the original video to a format viewable for everyone (flash), the video quality of the actual camera would be about 10% better.

Yes, it does come with schedule record feature. You can also have it record on motion detect within that time frame.

No, all-in-one cameras have a recorder built-in but there is no server built-in for internet connection. However, we carry many different types of wi-fi nanny cameras that will do the job.

Yes, DVR senses pixel movement of the video signal from the camera. So a DVR (built-in or separate) will detect motion when the camera is placed behind a window or glass barrier

Other info:
Since you can have the DVR record only upon motion, you can extend the recording time period which it is intended to cover. Each 1GB of memory will record up to 2.5 total hours of video.. However Since the camera and the DVR has to be on all the time, it will not extend the battery life. Typically, 1GB of memory will record up to 2.5 total hours of video.
Also, you can configure to eliminate certain areas of the picture from motion detection. Example would be deactivating lower 1/5 of the screen that would not capture creatures that enter only that part of the image.
Motion detection sensitivity is adjustable as well.

Many times, Windows Media Player will not play the video because it might not have a proper codec installed. We recommend the following players.

Please download GOM Player at:http://www.gomlab.com/eng/GMP_download.html
Or VLC Player at: http://www.videolan.org/

As a default, we program our all-in-one cameras at motion detection recording mode. So as soon as the power is applied, it'll will start to record automatically upon motion.
All all-in-one cameras come with a power supply for a permanent power.

Full size stand alone DVRs all come with a cooling fan that will make noise as much as a PC. Portable DVRs do not make any noise.

Yes, there is a loop mode for recording. When the memory is full, it will start to record from the beginning of the memory. In other words, you will always retain certain amount of most recent data.

All-in-one cameras: http://www.spycameras.com/cameras,all-in-one-camera.html refers to a system that has a hidden camera & a recorder built-in as one, similar to a camcorder.
All-in-one cameras can record upon motion. DVR senses pixel movement of the video signal from the camera. Since you can have the DVR record only upon motion, you can extend the recording time period which it is intended to cover. Each 1GB of memory will record up to 2.5 total hours of video.
When the recording is done, simply take out the SD card and playback the video on your PC using a media player. Audio is optional.

You will need to open 'Windows Explorer' screen by holding on to the "Windows" button located in between the CTL, ALT button & pressing the "E" key.
Right click on the removable drive that contains the SD card and choose the format option. Un-check the "quick format" option and start the format process.

DVR senses pixel movement of the video signal from the camera. Since you can have the DVR record only upon motion, you can extend the recording time period which it is intended to cover. Each 1GB of memory will record up to 2.5 total hours of video.. However Since the camera and the DVR has to be on all the time, it will not extend the battery life. Typically, 1GB of memory will record up to 2.5 total hours of video.
Also, you can configure to eliminate certain areas of the picture from motion detection. Example would be deactivating lower 1/5 of the screen that would not capture creatures that enter only that part of the image.
Motion detection sensitivity is adjustable as well.

We set it up the camera so that the recording continues on for 20 more seconds. If the motion is triggered again within that 20 second period, it will continue on recording until no motion is detected for whole 20 seconds. The buffer recording time is programmable from 0 to 30 seconds.

We set it up the camera at very sensitive motion detection. The sensitivity is programmable.

The standard default camera is 420 TV line compared to the upgraded camera at 550 TV line. However due to the limitation of the built-in recorder, you will not notice full 130 TV lines difference; the resolution will be improved about 20%. Since the sensor for the camera upgrade is higher quality, you can expect more natural color for the upgraded camera.

Yes, all all-in-one cameras that records on a SD card (except for the pen cameras) can also have TV out put to play back on a TV:
http://www.spycameras.com/cameras,all-in-one-camera.html

All in one camera is a camera with a recorder built-in. Also known as 'self contained camera'. It records onto itself so you can retrieve the recording later. Wireless camera refers to a camera that can transmit a video signal to a separate recorder. You can battery power some all-in-one cameras but it's not called wireless.

We suggest to use all-in-one cameras. Please check the following link: http://www.spycameras.com/cameras,all-in-one-camera.html . Any one of them are easy to use and include all the accessories needed.
All-in-one camera refers to a system that has a hidden camera & a recorder built-in as one, similar to a camcorder.
Also all-in-one cameras can record upon motion.
DVR senses pixel movement of the video signal from the camera. Since you can have the DVR record only upon motion, you can extend the recording time period which it is intended to cover. Each 1GB of memory will record up to 2.5 total hours of video.

Video quality of a camera really depends on the recorder that is connected to. Also, since cameras are analog, it need to be converted to digital format to post on the web, loosing resolution in the process. That is why we only have sample videos for "all in one system" that has a built-in digital recorder.

Can a camera see in total dark?

Cameras can not see in total darkness. You will need IR illuminators http://www.spycameras.com/other,led-lamps.html either built around the camera lens or as a separate lighting source (only for a B/W camera or a D/N camera). We do carry cameras that works in very low light conditions. Lower the lux rating, better it is under low light.

Does your cameras work with different voltage for other countries?

Most of our camera come with a power adapter that can handle form 110V ~240V AC.
In case of a direct AC plug-in camera such as clock radio camera
We will include the 220V to 110V (60Hz) step-down converter.
However, if your country uses 50Hz, the time on the clock, because it is digital, will not be correct (off about 20 min a day)

How does a camera adjust to different lighting level?

Every camera has auto electronic iris built-in. Unlike a human iris or other camera, there is no mechanical diaphragm that controls light intake, rather shutter speed changes automatically. Level of adjustment is very wide from low light to very bright light. You can actually place the camera an inch away from a lit 100W light bulb and still be able to read clearly the label on the bulb.

How does a camera work with a bright spot lighting source.

All cameras come with auto-electronic iris control. In a case in low light the iris will open up and brighten the picture automatically (however limited to it's lux rating)As long as the camera is not facing directly toward a light source in low light, it'll be OK. However if a light source would be on the screen, the iris will close thus darkening the picture of the surrounding.

How far or how much can you see with a camera?

Cameras can see Infinite, therefore It all depends on the size of the object. Wider the angle of the lens, smaller it will appear but area coverage will be greater. You can not have both zoomed in view and cover wide area. Most of our cameras come standard with wide angle lens (75 deg horiz) that will cover the whole room if placed at the corner looking towards the center of the room.

Try our CCD Lens Calculator for more information.

How much of a room can a camera view?

Most of our cameras come with around 4mm lens providing 75 deg in horizontal angle (for 1.3" CCD). That means if the camera is placed at the corner looking towards the center of the room, it'll cover most of the room regardless of its size.
Also all camera lenses are fixed focus and will focus to an object from about 2 ft away to infinity.

What is a wireless system?

Wireless system refers to a camera that can transmit video/audio signal to a receiver or to a wireless router without using any cable in between. There is no such thing as a wireless power, even a wireless cameras needs power either via plug-in or batteries.